sgc1045sa surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 1/4 2015.01-rev.a features ? schottky barrier diodes ? low forward voltage drop ? solder dip 260 c10s ? solder dip 260 c , 10 s ? low profile - typical height of 1.1 mm ? moisture sensitivity: level 1, per j-std-020 ? halogen-free according to iec 61249-2-21 definition ? high temperature soldering guaranteed: 260/10 seconds anode ? anode ? 2 cathode & ? heatsink esgc (to \ 277) ??? typical applications for low voltage high frequency inverters, dc/dc converters and polarity protection application. maximum ratings (ta = 25 c unless otherwise noted) parameter symbol unit sgc1045sa vrrm v vrms v vdc v if(av) 1) if(av) 2) ifsm a 45 31.5 45 a 5.0 peak forward surge current 8.3 ms single half sine - wave 175 maximum dc blocking voltage maximum average forward rectified current 10.0 maximum repetitive peak reverse maximum rms voltage parameter s y mbol u n it sgc1045sa ifsm a tj, tstg c electrical characteristics (ta = 25 c unless otherwise noted) ms single half sine - wave superimposed on rated load 175 operating junction and storage temperature range -55 to +150 i f =10a v f volts rated vr i r ma c j nf r ja sgc1045sa 0.55 0.35 typical junction capacitance 4.0 v, 1 mhz 0.85 1) juntion to ambient 90 t a =25 maximum instantaneous forward voltage t a =25 parameter test conditions symbol unit r ja r jm note:1),the thermal resistance from junction to ambient,case or mount,mounted on p.c.b with 3030mm copper pads,2 oz,fr4 pcb /w j untion to mount 35 typical thermal resistance 1) juntion to ambient 90 www.goodark.com 1/4 2015.01-rev.a
sgc1045sa surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 2/4 2015.01-rev.a ratings and characteristics curves ( ta = 25 unless otherwise noted ) figure ? 2. ? typical ? instantaneous ? forward ? characteristics ? figure ? 1.forward ? current ? derating ? curve figure ? 4. ? typical ? reverse ? characteristics ? figure ? 3. ? typical ? junction ? capacitance figure ? 5.maximum non \ repetitive ? peak ? forward ? surge ? current www.goodark.com 2/4 2015.01-rev.a
sgc1045sa surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 3/4 2015.01-rev.a package outline dimensions in inches (millimeters) min max min max dim unit: mm unit: inch min max min max he 6.4 6.6 0.252 0.260 e 5.6 5.8 0.220 0.228 d 4.1 4.3 0.161 0.169 b1 1.7 1.9 0.067 0.075 b2 0.8 1 0.031 0.039 a 1.05 1.2 0.041 0.047 c 0.3 0.4 0.012 0.016 c 0.3 0.4 0.012 0.016 l 0.85 1.1 0.033 0.043 l1 4.2 4.4 0.165 0.173 l2 l3 1.1 1.4 0.043 0.055 d1 3 3.3 0.118 0.130 e1 3.52 typ. 0.139 typ. 1.86 typ. 0.073 typ. soldering ?? footprint packing information packing quantities: 5000 pcs/reel 12mm tape, 13" reel 5000 pcs/ ee tape & reel specification www.goodark.com 3/4 2015.01-rev.a
sgc1045sa surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 4/4 2015.01-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer?s application; they do not convey any license under any intellectual property rights or any other rights belonging to suzhou good - ark electronics co ltd or a intellectual property rights , or any other rights , belonging to suzhou good - ark electronics co ., ltd . or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party?s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials including product data diagrams charts programs and all i n f orma ti on con t a i ne d i n th ese ma t er i a l s, i nc l u di ng pro d uc t d a t a, di agrams, c h ar t s, programs an d algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts , p ro g rams , and al g orithms , please be sure to evaluate all information as a total s y stem before charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.01-rev.a
|
